Beyerdynamic MCE 86 II / MCE 86 2
Shotgun Microphone
EUR 374.10
Incl. VAT, free shipping in Portugal
Product # | 80548 |
Brand | Beyerdynamic |
Category | Reporter & Shotgun Microphones | Brand Category | Beyerdynamic - Shotgun Microphones |
Series | Beyerdynamic MCE Beyerdynamic MCE 86 |
Release date | June 2004 |
Availability | Will be ordered for you as quick as possible |
This page contains auto-translated text
Description
Shotgun Electret Condenser Microphone Professional Cameras Consumer Camcorders DAT and MD Recorders Reportage Theater Choir Acceptance Lectern The new microphones of the MCE 86 II series are used where a particularly pronounced directivity is required. This is the case with video recordings where the sound source should be recorded without any ambient noise. The pronounced directivity reduces the risk of feedback when used on lecterns or in theater sound systems. The microphones are extremely light, robust and handy and therefore ideal for attaching to television and film cameras or camcorders. When used with a microphone boom or as a handheld microphone, they are suitable for outdoor use as well as in the studio. Due to its construction and a built-in active filter, the MCE 86 II is insensitive to wind influences and structure-borne noise caused by zoom motors. The result is an impressively precise reproduction of every sound source. The MCE 86 II comes with phantom power for (most) condenser microphones: it is supplied from the mixer to the microphone via the three-wire XLR cable. supplied via the symmetrical connection. If no phantom power Power supply for (most) condenser microphones: it is supplied from the mixer to the microphone via the three-wire XLR cable. is available, the MCE 86 S II can be used. Alternatively, this can also be operated with a 1.5 V AA battery. The new scratch-resistant plastic coating is non-reflective and effectively suppresses handling noise. Features: High sensitivity, excellent directional properties, robust yet lightweight housing, non-reflective, scratch-resistant plastic coating
Attributes
Product Details
|
Properties
- Transducer principle: capacitor (back electret) - Working principle: pressure gradient - Directional characteristic: hypercardioid/lobe - Field no-load transmission factor at 1 kHz (0dB = 1V/Pa): 30 mV/Pa - Nominal impedance: 150 Ohm - Nominal terminating impedance: >1 kOhm - Length: 253 mm ( MCE 86 II ) / 310 mm ((MCE 86 S II) - Shaft diameter: 25 mm / 21 mm - Weight without cable: 92 g ( MCE 86 II ) / 120 g (( MCE 86 S II) - Transmission range: 50 - 18,000 Hz - Max. limit sound pressure level at 1 kHz: 128 dB - Signal-to-noise ratio based on 1 Pa: > 61 dB - Power supply: Phantom power 11 - 52 V
Documents (2)
Report incorrect data about this product
Recommended accessories
Beyerdynamic EAP MEDIUM
EUR 519.90