- Frequency response 18Hz-19kHz

- Sensitivity 105dB (1kHz)

- Impedance 35Ω

DP series drum microphone set including Case

Drum Mic Package DP5: consisting of 1 x Audix i5 for snare, 2 x Audix D2 Tom, 1 x Audix D6 for kick drum and 1 x Audix D4 Floor Tom, including Road-Case and 4 x D-Vice Microphone with flexible gooseneck mounts

Dynamic handheld microphone

FireBall is a dynamic microphone specially developed for the professional harmonica player. Acoustically optimally tuned for both chromatic and diatonic harmonicas.

Fusion Drum package consisting of: 2x overhead for F9, F2 3x for Toms, 1 Snare for F5, F6 for Kick 1x and 5x D-clip microphone stand adapter for terminals, including aluminum road case.

Dynamic vocal mic designed for professional use

Designed for touring PA system. Low output gain stage designed to provide maximum gain before feedback in monitors

Fusion series overhead microphone, condenser capsule with cardioid, 40Hz-20kHz, high resolution and clear sound for hi-hat, cymbal or acoustic instruments

Microphone clamps

Microphone clip with flexible gooseneck, suitable for drums, including MC microphone clamp, if necessary this can be exchanged for other clamps that also have a 5/8" thread.

Flexible multi-position metal gooseneck

. Locks firmly into position

. Fingertip control

Microphone clamps rotatable, stable PVC snap microphone clip for e.g. DSeries, SCX-Series, ADX51, TR

With metal knurled screw to fix the joint; 5/8" thread including adapter to 3/8" is included in the delivery of the D series

Stage Microphone bracket system made of aluminum

For easy and secure mounting on all common guitar or Guitar Combos Cabinets.

Operating Principle: Dynamic

Driver Size: 45 mm

Impedance: 32 Ohm

Type: Dynamic

Frequency Response: 10 Hz – 25 kHz

Output Impedance: 32 Ohm

Transducer Type - Pre-polarized Condenser

Power Requirements - 5-52V phantom

Connector - Shielded 3’ terminating to a minature 3 pin XLRf

Transducer Type: Condenser

Frequency Response: 40 Hz – 20 kHz

Output Impedance: 150 ohms

XL version of the Stage microphone holder system made of aluminum

For easy and safe installation on all common guitar combos or guitar cabinets with depths of 35.5-50cm

Flute Microphone (including APS 911 Phantom Adaptor)

Microphone stand-Adapterclip for the AUDIX Micro-D microphones, and ADX20 M1245/M1290-Serie.

For 12mm in diameter, adjustable with knurled nut, black, 5 / 8 "thread with 3 / 8" adapter

7.5m XLR-XLR cable with angled plug on the microphone side

Suitable for electret microphones, with metal belt clip and on / off switch for battery or phantom power supply type UM-3/AA 9-52 V, 3-Pin Mini-XLR to XLR-male

Microphone clamps.

Especially for drums, percussion, piano, microphone stand, guitar combos etc., including MC clip, if necessary this can be exchanged for other clips with a 5/8" thread

Instrument-specific mics for optimal results

Rugged Audix quality

Road case

Condenser microphone for live and studio applications, suitable for up to 144dB SPL SPL

distortion. Pad and rolloff switches, Rückkopplungsunempfindlich very suitable for speech, vocals and many acoustic instruments.

The FireBall V is a professional dynamic microphone specifically designed for harmonica (both chromatic and diatonic) and beatbox.

Microphone clamps

Microphone stand adapter for microphones from the Audix OM series and comparable, black, 5/8" thread with 3/8" adapter, unbreakable