DPA SMK4061
Microphones Set
CHF 1114.00
Free delivery in Switzerland
Product # | 139137 |
Brand | DPA |
Category | Microphones Sets | Brand Category | DPA - Mic Sets |
Series | DPA d:screet DPA d:screet Kits |
Release date | October 2017 |
Availability | Will be ordered for you as quick as possibleNotify me |
Description
The SMK4061 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage.
The SMK4061 combines two DPA 4061s omnidirectional miniature microphones, Lo-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a 4061 (or any of DPA's miniature mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom.
Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs
Also available as SMK4060 with a DPA4060 Miniature Omnidirectional Microphone, Hi-Sens.
TEC award 2007: The SMK4061 is among the nominees chosen by MIX Magazine's Nominating Panel for 'Outstanding technical achievement - Microphone Technology / Recording '.
DUA0560 Windscreens, black, 5pcs
1 Stk.
DMM0007 Universal Surface Mount, 5pcs.
2 Stk.
DMM0011-B Magnet Mount, black
2 Stk.
DAD6001-BC Adapter: MicroDot to 3-pin XLR (P48) with belt pack
2 Stk.
BLM6000-B Boundary layer mount, black
2 Stk.
4061-BM Miniature Omnidirectional microphone, Lo-Sens, black
2 Stk.
The SMK4061 combines two DPA 4061s omnidirectional miniature microphones, Lo-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a 4061 (or any of DPA's miniature mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom.
Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs
Also available as SMK4060 with a DPA4060 Miniature Omnidirectional Microphone, Hi-Sens.
TEC award 2007: The SMK4061 is among the nominees chosen by MIX Magazine's Nominating Panel for 'Outstanding technical achievement - Microphone Technology / Recording '.
DUA0560 Windscreens, black, 5pcs
1 Stk.
DMM0007 Universal Surface Mount, 5pcs.
2 Stk.
DMM0011-B Magnet Mount, black
2 Stk.
DAD6001-BC Adapter: MicroDot to 3-pin XLR (P48) with belt pack
2 Stk.
BLM6000-B Boundary layer mount, black
2 Stk.
4061-BM Miniature Omnidirectional microphone, Lo-Sens, black
2 Stk.
Attributes
Product Details
|
Properties
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: 20 Hz - 20 kHz ±2 dB, Soft boost grid: 3 dB soft boost at 8 - 20 kHz, High boost grid: 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 - 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
Color: Black
Weight: 7.5 g (0.26 oz) including cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (6 ft)
Cable: Black
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: 20 Hz - 20 kHz ±2 dB, Soft boost grid: 3 dB soft boost at 8 - 20 kHz, High boost grid: 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 - 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
Color: Black
Weight: 7.5 g (0.26 oz) including cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (6 ft)
Cable: Black
Brand
Report incorrect data about this product