Doepfer A-145-4 Quad LFO
LFO Module
CHF 78.00
Free delivery in Switzerland
Product # | 247515 |
Brand | Doepfer |
Category | LFO Modules |
Release date | January 2024 |
Availability | 1 unit in stock |
Shop | Availability |
---|---|
Giebenach BL | 1 piece in stock |
Description
Module A-145-4 is a simple quad LFO (Low Frequency Oscillator). Not a very "exciting" module, just a bread-and-butter device and a simple demon for work. Virtually in every modular system several LFOs are required for modulation purposes. The module contains four simple LFOs with the waveforms triangle and rectangle. A dual color LED (red = positive / yellow = negative output voltage) indicates the triangle output of each LFO. The frequency range can be chosen for each LFO individually by means of a jumper between about 50 Hz ... 0,1 Hz (about 10 seconds, jumper removed) and about 2Hz ... 0,004 Hz (about 3-4 minutes, jumper installed).
The module can be treated as a slimmed version of the quad LFO A-143-3 as it has similar features available. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is less than one third of the A-143-3. The module is primarily planned for applications where only limited space is available. The functional difference compared to the A-143-3 are the missing sawtooth outputs and frequency range switches.
If more advanced features are required (e.g. additional waveforms, complex waveforms, waveform reset, adjustable waveforms, voltage controlled frequency and level) the modules A-143-1, A-143-3, A-143-4, A-145-1, A-146 and A-147-2 are available.
The module can be treated as a slimmed version of the quad LFO A-143-3 as it has similar features available. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is less than one third of the A-143-3. The module is primarily planned for applications where only limited space is available. The functional difference compared to the A-143-3 are the missing sawtooth outputs and frequency range switches.
If more advanced features are required (e.g. additional waveforms, complex waveforms, waveform reset, adjustable waveforms, voltage controlled frequency and level) the modules A-143-1, A-143-3, A-143-4, A-145-1, A-146 and A-147-2 are available.
Attributes
Key attributes
| ||||||||||
Colour
| ||||||||||
Module Specifications
| ||||||||||
Case Specifications
| ||||||||||
Power Consumption InformationMost Eurorack modules tend to only require the dual 12V rails (positive/negative), but some modules may need some amount of +5V current to function.
| ||||||||||
LFO Module attributes
| ||||||||||
Product Details
|
Specifications
- Width: 4 TE / 4 HP / 20.0 mm
- Depth: 30 mm (measured from the rear side of the front panel)
- Current: +30 mA (+12V) / -30 mA (-12V)
- Depth: 30 mm (measured from the rear side of the front panel)
- Current: +30 mA (+12V) / -30 mA (-12V)
Report incorrect data about this product