Login with Facebook
I was using two power supplies for my many pedals and they were working fine, but the power was for the United States. I have moved permanently to Europe and had to run these with light duty transformers. I've blown 2 transformers so far. So I needed a solution, and seeing the Truetone CS 12 with its modern approach, it seemed like a great option. It has the ability to power effects in Europe or the states! That's a big strong point for me. Something I didn't realize was how much quieter it would make my signal chain. This was the biggest improvement. The pedal power supplies I've been using are great and I've used them about 10 years now, but this one goes further. I will more than likely buy a smaller version of the Truetone to power a smaller pedal board that I bring to practice and gigs that are focused on 10 songs or less. This unit isn't sexy, but it gets the job done better than anything so far!
Truetone CS 12
MSRP: CHF 235.00
| Product # | 207204 |
| Brand | Truetone |
| Category | Effect Pedal Power Supplies |
| Release date | May 2020 |
| Availability |  1 unit in stock |
| Shop | Availability |
|---|---|
| Giebenach BL |
1 piece in stock |
Description
1 SPOT Technology
1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. We took the same triple filtered switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.
Multiple Voltages
We recognize that not all guitar pedals run off 9V. That’s why all 1 SPOT Pro models have outputs that can put out 9Vdc, 12Vdc or 18Vdc. The CS12 even has a variable voltage output for old-style fuzz pedals, and a 9Vac output for certain Line6 and Digitech pedals. And if you need to change the voltage of an output, Truetone also makes inexpensive converter cables to help you. There’s the Voltage Doubler, which does exactly what its name says, and the 18V to 9V Converter... which also does what its name says. They don’t have the most clever names, but they get the job done!
Worldwide input voltage
Just like with the original 1 SPOT, and your laptop power supply and phone charger, the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world. The CS12 has an input voltage switch on the back, which switches voltage only for the 9VAC output, since that output does use a toroidal transformer. The rest of the outputs on the CS12, and all of them on the CS6 and CS7, don’t care what the input voltage is.
Rugged Steel Housing
If you’re a touring musician, or even if you just play at the local pub regularly, you know how important it is to have roadworthy gear. No worries with the 1 SPOT Pro. The housing is all steel, with cleverly designed vents that should keep out the accidental beer spill, should that ever happen.
Pure Isolation
Since pioneering the first switching power supply for musicians, the original 1 SPOT, we’ve gained many years of experience in creating very low noise power for pedals. When we started designing the 1 SPOT Pro, the first multiple output switching power supply, we worried a lot about how to eliminate noise completely. Isolation is part of the solution to noise elimination, but not all of it. Each output is galvanically isolated from the other to help give you pure, clean, noise-free operation of your pedals. However, we also provided an additional layer of pure analog regulation, taking advantage of the greater ability of analog circuits to provide the highest possible suppression of in-band audio noise. There is an artistry involved in these designs, and it’s come at the price of decades of hard work. But all of this put together is what we call Pure Isolation.
Energy Efficient
Prior to the 1 SPOT, musicians either used one linear power supply (a.k.a. wall wart) per pedal, or used batteries. Both solutions for powering pedals were very inefficient with energy, with batteries also contributing greatly to the toxic waste stream. In 2000, we pioneered the use of switching power supply technology to alleviate this condition in an economically-, energy- and environmentally-conservative way. The 1 SPOT power supply was designed to replace many such external power supplies and/or batteries simultaneously. It provided plenty of power with a very low noise level to successfully meet the needs of musicians. By offering musicians a solution that was more cost effective and energy efficient, and moving the market away from linear transformer-based power supplies to switching power supplies, Truetone has caused the saving of thousands of watt-hours per musician per year. Utilizing a more comprehensive switching power supply solution, the 1 SPOT Pro sets a new level of efficiency for power bricks, while still meeting the needs of musicians for low noise operation, even in severe conditions where the pedals themselves may generate interfering noise.
With most digital pedals requiring an isolated power source, the 1 Spot Pro is designed with each output isolated from one another. This construction allows the power supply to deliver pure, clean, noise free operation for the pedal. An additional layer of pure analogue regulation takes advantage of the analogue circuits to provide a suppression of in-band audio noise, eliminating any hints of noise to create the ultimate clean power supply.
The 1 Spot Pro CS12 features a 9V AC output option for pedals that require an alternate current instead of a direct current. The 9V AC output is designed with a small toroidal transformer dedicated to that only output, creating a completely isolated construction for a clean, noise free operation.
Featuring Truetone’s switching power supply technology, the 1 Spot Pro can deliver clean, reliable power no matter where you are. Whether you’re using 100V, 120V, 240V, or any other variation, the CS12 will deliver a clean source, allowing you to take your pedals with you to anywhere in the world. A switch is also added to the power supply, allowing you to switch the voltage for the 9V AC output to ensure you will never be restricted.
Designed to be the ultimate guitar pedal power supple, the 1 Spot pro features a strong and sturdy steel case to protect the circuitry from potential damage, perfect for musicians on the road or play many gigs. The compact and sleek design allows for incorporation into most pedalboards, and the included mounting brackets allow the power brick to be attached to a pedaltrain pedalboard.
Attributes
Product Details
|
Reviews (1)
Operation:
Features:
Sound:
Operation:
Features:
Sound:
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Truetone CS 12
#207204
![[[missing key: down arrow]]](/images/icons/chevron-down-solid.svg){kind=icon}