- OSCILLATORS
- Three discrete VCOs per voice
- Simultaneously selectable waveforms: triangle, sawtooth, inverted sawtooth and variable width pulse.
- Pulse width per oscillator
- Hard Sync: Oscillator 1 synchronizes with Oscillator 2
- Keyboard tracking on/off (Oscillator 3)
- Oscillator feedback and drive controls for increased signal saturation
- Source of white noise
- Keyboard pitch tracking on/off
-
- LOWPASS FILTER
- Switchable two/four-pole, discrete, resonant low-pass ladder filter per voice
- Filter can be set into self-oscillation with the resonance control
- Bi-polar filter envelope value
- Speed modulation of the envelope
- Keyboard tracking: off, half, full
-
- FILTER ENVELOPE
- Four-stage (ADSR) envelope generator
- Speed modulation of the envelope
-
- ADSR ENVELOPE CURVE
- Four-stage (ADSR) envelope generator
- Velocity modulation of the envelope curve
-
- LFO
- Five waveforms: sine, sawtooth, inverted sawtooth, square and random (sample and hold)
- LFO synchronization
- Initial Amount
- Mod Targets: Oscillator 1 Frequency, Oscillator 2 Frequency, Oscillator 3 Frequency, Oscillator 1 Pulse Width, Oscillator 2 Pulse Width, Oscillator 3 Pulse Width, Filter Cutoff, Amp (VCA)
-
POLY MOD
- Sources: Oscillator 3 (bi-polar) and filter envelope (bi-polar)
- Targets: Frequency of Oscillator 1, Frequency of Oscillator 2, Frequency of Oscillator 3, Pulse Width of Oscillator 1, Pulse Width of Oscillator 2, Filter Cutoff, Feedback Amount
-
- VINTAGE KNOB
- Recreates vintage synth characteristics by adding variations in component behavior from voice to voice
-
- AFTERTOUCH
- Source: Channel (mono) Aftertouch with bipolar amount
- Targets: Targets: Oscillator 1 frequency, Oscillator 2 frequency, Oscillator 3 frequency, LFO amount, Amp envelope amount, Filter envelope amount, FX Mix A, FX Mix B
-
- CLOCK
- Master clock with tap tempo
- BPM control and display
- MIDI clock synchronization
-
- ARPEGGIATOR
- Selectable note value: 16th note, 8th triplet, 8th note, dotted 8th note, quarter note
- One, two or three octave range
- Up, Down, Up/Down, Random and Assign modes
-
- SEQUENCER
- Polyphonic step sequencer with up to 64 steps and pauses
-
- EFFECTS
- Analog stereo distortion
- Two 24-bit 48kHz digital effects including: Reverb (room, hall, plate and spring reverb), delay (full bandwidth digital delay and emulated bucket brigade), Chorus, Flanger, Phase Shifter and Ring Modulator ;
- delay synchronization
- True Bypass ensures a fully analog signal path when digital effects are turned off.
-
- PERFORMANCE CONTROLS
- Hold switch holds held notes
- Polyphonic portamento
- Unison mode (monophonic) with configurable number of voices, from one to all six voices, and button modes to control the priority of voice triggering.
- Preset switch: When turned on, the panel is live - what you see is what you hear
-
- PATCH STORAGE
- 500 user and 500 factory programs in 10 banks with 100 programs each
- Direct program access, including one-button access to the current set of 10 programs.
-
ON/OFF
- Audio outputs left/mono and right (2 x 1/4" jack plugs) Headphone output (stereo, 1/4" jack plug) MIDI input, output and thru ports USB for bi-directional MIDI -Communication
- Filter cutoff input for expression pedal
- Input for expression pedal for volume control
- Sustain footswitch input
- Input for sequencer start/stop footswitch
-
- ELECTRICITY
- IEC AC connector for internal power supply
- Operates worldwide with voltages between 100 and 240 volts at 50 to 60 Hz; maximum power consumption 30 watts
-
- PHYSICAL CHARACTERISTICS
- End plates made of maple wood
- The Trigon 6 table module weighs approximately 4.95 kg (10.9 lbs.) and measures 22.00" L x 8.45" W x 4.54" H (55.88 cm x 21.46 cm x 11.53 cm).