Shure SLXD14E/98H (562-606MHz)

Digital Wireless Receiver
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction

Bodypack Transmitter
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- Operating range of 100 m (300 ft.)
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics.
- Choice of instrument cable or lavalier, headworn and instrument microphones
- Ergonomic and durable plastic construction

Instrument Microphone
- The WB98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range.
- The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise.
- Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
- Tailored frequency response for studio quality performance
- Wide dynamic range for use in high SPL environments
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
- Optional A98D drum mount is unobtrusive and versatile--allows precise positioning of the microphone while holding it firmly in place
- Compact design reduces stage clutter
- Detachable cable for easy storage
- Interchangeable microphone cartridges with different polar patterns are available
- Legendary Shure quality, ruggedness, and reliability

- Weight: 2.210kg

SLXD14/B98H Specifications
Set Type: Presenter
Amount of Bodypacks: 1
Amount of Handhelds: 0
Amount of TQG Mics: 1
Number of compatible systems per frequency band: 32

SLXD4 Specifications
Weight: 816 g
Height x Width x Depth: 42.0 × 197.0 × 152.0 mm
Transmission: Digital in UHF TV band
Type of Power Supply: External
Receiver Housings: Metal
Bias via BNC: No
High Density Mode: No
Interference Detection: No
Remote Control: No
Number of compatible systems per frequency band: 32
DANTE-Enabled Products: No
Detachable Antennas: No
Logic: No
Cascade: No
Line Mic Switch: No
Phantom Power Protection: No

SLXD1 Specifications
Weight: 89 g
Height x Width x Depth: 98.0 × 68.0 × 25.5 mm
Transmitter weight: 89 g
Battery life lithium: 8 h
Battery life alkaline: 8 h
Form Factor: Bodypack
Audio Mute: No
Detachable Antennas: No
Switchable RF power: No
Batteries: AA, Shure Lithium-Ion battery
Connectors: TQG
Frequency Diversity: No
Functionality: Transmitter
High Density Mode: No
Included antenna: 1/4 wave
Input impedance: 1000 kΩ
Transmission: Digital in UHF TV band

WB98H/C Specifications
Weight: 65 g
Frequency Response: 20 Hz – 20 kHz
Frequency Response: Tailored
Sensitivity: -56.00 dBV/Pa – 1.60 mV/Pa
Equivalent Selfnoise: 31 dB(A)
Sound Pressure: 155 dB (@ 1 kΩ), 163 dB (@ 2,5 kΩ)
Transducer Type: Condenser
Polar Pattern: Cardioid
Switchable low cut: No
Connectors: TQG (T4AF, 4-Pin Mini)
Attenuator: No
Interchangeable Capsule: Yes
Main Functionality: Performance
Headphone Output: No
Cartridge: Interchangeable


Further Specs:

Housing: Galvanized Steel
Power Requirements: 15 VDC @ 600 mA
Supplied by external power supply (tip positive)

RF INPUT

Spurious Rejection: >75 dB Typical
Connector Type: BNC
Impedance: 50 Ω

AUDIO OUTPUT

Gain Adjustment Range: –18 to +42 dB in 1 dB steps Configuration:
1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio –)
Impedance:
1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
Full Scale Output:
1/4" (6.35 mm): +15 dBV differentially (+9 dBV single) XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection:
1/4" (6.35 mm): Yes
XLR: Yes

NETWORKING

Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)