Radial - Passive DI Boxes

Jensen Transformer equipped passive DI

Eliminates hum and buzz from ground loops

Virtually zero phase & harmonic distortion

Wirelessly connect smartphones and tablets to a mixer

Bluetooth reception of up to 30 meters (100ft)

Dual balanced XLR outputs feed the PA system

Stereo passive DI box with very linear transmission (20Hz to 18kHz).

The Pro DI2 is the stereo version of the Pro DI and also has the custom-made audio transformers, which guarantee no clipping.

2x 6.3 mm Jack inputs

2x 6.3 mm Jack outputs

Switchable pad

Passive DI box up with a very linear frequency (20Hz 18kHz).

The audio transformer are specially manufactured for the Pro DI and guarantee no clipping in the critical bass and mid ranges.

Extremely stable, designed Re-amping box.

The radial ProRMP is a completely passive re-amplifier that allows you to record a previously recorded track through a guitar amplifier or effects pedal again to achieve new and exciting sounds.

Eliminates hum & buzz caused by ground loops

Exceptionally linear response from 20Hz to 18kHz

Able to handle pro output levels without choking

Eliminates hum and buzz from ground loops

1/4", 3.5mm, RCA, and XLR inputs to connect to any source

Exceptional signal handling and noise rejection

Passive stereo DI box for AV systems.

The AV2 was developed specifically for audio-video systems. It is the stereo version of the AV1 (but without an XLR input and RCA-Thru).

Converts professional +4dB stereo to -10dB consumer level device, at a high quality.

Jenson transformer, full bandwidth performance.

Passive DI box with integrated stereo to mono mixing.

The AV1 was developed specifically for audio-video systems. It has a 6.3mm jack socket (instruments), 3.5mm jack and RCA sockets for 10dB consumer hardware, as well as an XLR input for professional, balanced +4dB line signals.