EarthQuaker Devices Tone Job V2 / Eq/Boost
Equalizer Pedal
EUR 199.00
MSRP: EUR 219.00
MSRP: EUR 219.00
Incl. VAT. Free delivery in Germany from EUR 200
Product # | 231112 |
Brand | EarthQuaker Devices |
Category | Equalizer Pedals | Brand Category | EarthQuaker Devices - Equalizer Pedals |
Release date | September 2022 |
Availability | Will be ordered for you as quick as possible |
Shipping cost: EUR 29.90
Description
The Tone Job is a complete tone enhancement tool with EQ and Booster suitable for guitar, bass, synthesizer and more. The Tone Job is equipped with controls for Level, Treble, Mid and Bass, where the last three will cut or boost up to 20db. The level control will boost the signal (post EQ) up to 5 times the input depending on where the dial is set. The EQD Tone Job can be used for example at the end of the effect chain for tone fine tuning. The Tone Job V2 uses silent relay-based soft touch switching. Audio will not pass without power.
Attributes
Product Details
|
Properties
- Equalizer and Tone Enhancer with boost
- active 3 band EQ
- up to +-20 dB of boost/cut per band
- up to 5x post EQ level boost of the input signal
- all analog
- true bypass
- Bass and Treble response dependent on Mid setting
- controls for Level, Treble (2 kHz shelf), Bass (500 Hz shelf) and Mid (1 kHz bell resonant filter)
- bypass footswitch
- silent relay-based soft touch switching
- status LED
- metal housing
- 6.3 mm mono IN/OUT jacks
- power supply via 9V battery or optional 9V – 18V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center
- dimensions (D x W x H) 117 mm x 64 mm x 57 mm
- current draw 10 mA
- hand made in USA
- active 3 band EQ
- up to +-20 dB of boost/cut per band
- up to 5x post EQ level boost of the input signal
- all analog
- true bypass
- Bass and Treble response dependent on Mid setting
- controls for Level, Treble (2 kHz shelf), Bass (500 Hz shelf) and Mid (1 kHz bell resonant filter)
- bypass footswitch
- silent relay-based soft touch switching
- status LED
- metal housing
- 6.3 mm mono IN/OUT jacks
- power supply via 9V battery or optional 9V – 18V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center
- dimensions (D x W x H) 117 mm x 64 mm x 57 mm
- current draw 10 mA
- hand made in USA
Report incorrect data about this product
Recommended accessories
BlackLine DC0103AA (15cm)
EUR 7.79