Palmer PDI06L08

Power Attenuator

EUR 269.00
MSRP: EUR 362.00

Incl. VAT, free shipping in Germany

Product #	151675
Brand	Palmer
Category	Power Attenuators
Brand Category	Palmer - Power Attenuators
Release date	August 2011
Availability	Will be ordered for you as quick as possible

Add to wishlist

Palmer Power Attenuator - Control the volume of your guitar amp

The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level

4.4 out of 5 | 3 Reviews | Write a review

Description
Attributes
Properties
Reviews

Description

The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An additional setting mutes the speaker completely; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier.

This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets.

The total impedance of the speakers must equal the value shown on the PDI06. For example: the outputs of a PDI06 that is specified for 8 ohms can be connected to one 8 ohm cabinet or two 16 ohm cabinets. The output of the (tube) amplifier is also set to 8 ohms.

Attributes

Product Details

Product Number	151675
Brand	Palmer
Category	Power Attenuator
Brand Category	Palmer - Power Attenuators
Relevancy rank	22 of 25
Date	August 2011

Dimension

Weight	2.6kg
Box Depth	389mm
Box Height	82mm
Gross Weight	2.8kg

Properties

Maximum input power: 120 Watt
6-position switch, 5 increments (3 dB each) for volume reduction, equivalent to attenuation of the input power to 70%, 50%, 35%, 25%, 18%.
The LOAD BOX position mutes the connected speaker cabinet.
The BYPASS/ATTENUATOR switch lets the user toggle quickly between full and reduced output.
Input from amplifier: 1 x 6.3 mm jack socket
Output for speaker cabinets: 2 x 6.3 mm jack sockets connected in parallel
Output impedance: 8 Ohms und 16 Ohms versions available

- Weight: 2.600kg