Beyerdynamic MCW-D 2073

- High immunity to interference and interception during data transmission thanks to the special DSSS modulation process
(Direct Sequence Spread Spectrum) also used with other radio systems
- Wireless transmission with integrated transmit and receive antenna in the globally approved 2.4 GHz frequency band
Digitally encrypted audio signals to prevent unauthorized listening and eavesdropping
Integrated broadband speaker with speech equalization and slight tilt angle
- Multilingual LC display 2 lines, 16 characters, with automatic lighting switch-off
- 3 multifunctional buttons in conjunction with LC display for voting, channel selection for interpreting applications,
- Headphone volume, battery status display or volume control of the entire conference system
- Gooseneck microphone with excellent audio quality
- The red light ring on the gooseneck lights up when the intercom station is ready to speak
- Microphone button for switching the microphone station on and off
- Delete button “Clear” to switch off all active delegate microphone units
- Freely programmable function key for different priorities or external controls
- Green LED for microphone switched on and ready to speak
- Multifunctional port for DC operation or battery charging
- Gold-plated charging contacts for charging cases
- Power display
- 3.5 mm stereo jack as a headphone output or as a documentation output for connecting recorders, dictation machines, etc.
Mounting option for 3/8" tripod adapter (optional)
- Modern design all-metal housing with non-reflective, scratch-resistant Nextel surface coating
- Processor programming allows setting the following parameters:
Speaker level, recording/headphone level, speaker attenuation when microphone is switched on, auto-off behavior,
RF transmit power, RF input sensitivity, low battery indicator threshold, voice-controlled switch-on, hold time
- Auto-off switch for microphone when not in discussion
- Programming takes place online via the control center with the appropriate configuration software
- APO = Automatic switch-off of the intercom station in the event of a standby command from the control center or when the control center is switched off
- Maximum charging time 2 hours with a completely empty battery (NiMH) with charging case
- Operating time 8 - 9 hours depending on the ratio of speaking / listening only