RDL ST-DA3 Line Level Distribution Amplifier
Distribution Amplifier
EUR 397.50
Incl. VAT, free shipping in Germany
Product # | 214107 |
Brand | RDL |
Category | Distribution Amplifier | Brand Category | RDL - Distribution Amp |
Release date | March 2020 |
Availability | Will be ordered for you as quick as possible |
1x3
Description
The RDL-ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The RDL-ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.
The RDL-ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
The RDL-ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
Attributes
Product Details
|
Properties
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
Specifications
Input: 20 kΩ balanced or unbalanced
Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
Maximum Input Level: +24 dBu
Outputs (3): 150 Ω balanced or 75 Ω unbalanced
Output Signal:
Balanced: +4 dBu nominal balanced;
Unbalanced: 6 dB below balanced line level
Maximum Output Level: +25 dBu
Frequency Response: 10 Hz to 100 kHz (± 0.05 dB)
THD+N: < 0.002% (unity gain)
IMD: < 0.003% (unity gain)
Noise below +4 dBu: < -98 dB (unity gain)
Headroom: > 20 dB (above +4 dBu)
Gain: Unity ± 17 dB (adjustable)
CMRR: > 60 dB (50 Hz to 120 Hz)
Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
Package Type: Cardboard Box
Package Dimensions: 2 x 2 x 4 in.
Shipping Weight: 0.2 lbs.
WEEE weight: 0.145 lbs.
Tariff code: 8518.40.2000
Input Signal: -15 dBV to +21 dBu (for +4 dBu output)
Maximum Input Level: +24 dBu
Outputs (3): 150 Ω balanced or 75 Ω unbalanced
Output Signal:
Balanced: +4 dBu nominal balanced;
Unbalanced: 6 dB below balanced line level
Maximum Output Level: +25 dBu
Frequency Response: 10 Hz to 100 kHz (± 0.05 dB)
THD+N: < 0.002% (unity gain)
IMD: < 0.003% (unity gain)
Noise below +4 dBu: < -98 dB (unity gain)
Headroom: > 20 dB (above +4 dBu)
Gain: Unity ± 17 dB (adjustable)
CMRR: > 60 dB (50 Hz to 120 Hz)
Power Requirement: GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA
Package Type: Cardboard Box
Package Dimensions: 2 x 2 x 4 in.
Shipping Weight: 0.2 lbs.
WEEE weight: 0.145 lbs.
Tariff code: 8518.40.2000
Report incorrect data about this product